Last Updated on June 22, 2022
If your ceiling has peeling paint, you may wonder whether you can cover it with lining paper. But before you do that, you need to make sure that the plaster substrate is properly prepared.
Also, you need to know how to hang conventional lining paper and paste-the-wall lining paper. You should soak both kinds of paper for the recommended amount of time to ensure a good fit. Otherwise, you may end up with bubbles, lifting at the seams, and an inferior finish.
Using lining paper to cover peeling paint
When you want to cover peeling paint, there are several ways you can do it. The first method involves using adhesive on one side of the lining paper.
You can make your own paste, or purchase one that is already made and mixed with water. Before you hang the lining paper, wait at least three minutes for it to absorb. Doing so will prevent a sticky facing side and a messy workspace.
Lining paper is a type of drywall paper that comes in varying grades and thicknesses. You can find the smallest grade at 800, while the thickest is 2000.
This is based on the condition of the wall, so a thin roll of lining paper will cover small hairline cracks, while the thicker 2000 grade is more noticeable and can hide pitting and uneven plastering.
The second type of lining paper is called paste-the-wall lining paper. Paste-the-wall lining paper is made with textile fibres and is easier to apply than conventional lining paper.
It also won’t expand, shrink, or lift. Using this kind of lining paper will cover your peeling paint and leave a flawless finish. It’s not necessary to sand the wall before applying the lining paper.
Another method involves plastering. This is a process in which you prepare the walls and apply plaster to fill in the cracks. You then use hand floats to smooth out the plaster.
After the plaster is applied, the wall will be smooth again, but your walls may still have lumps or bumps. In this way, you can save money while covering peeling paint. Aside from saving money on paint, this method will also cover peeling paint and ensure that your walls will look great.
When patching up a wall, you can use lining paper to hide imperfections. You can also use it to cover bare plaster and hide imperfections on walls.
By putting it on the wall, it creates a paintable surface and helps hide any imperfections on the wall. However, the process will take longer than you might think. For the best results, make sure to apply a good sizing on the wall before lining paper is applied.
Preparing the plaster substrate before hanging lining paper
Getting a smooth paint or wallpaper finish begins with preparing the plaster substrate properly. Unless you’ve recently painted the room, you’ll likely be surprised to see that a recent layer of latex or floral vinyl is still lurking behind the new surface.
A preliminary coat of plaster will help prevent the substrate from absorbing moisture and crumbling. Using a bucket with clean water about half-full is the best way to apply the plaster mix.
Shake the new bag of plaster mix into the bucket until it forms a mound over the water. Use a stirring rod or plunger to incorporate any dry plaster particles.
If you have freshly applied plaster, it’s important to wait a month before you start applying the new paper. A month or so before the paper is applied, it’s important to give the new plaster a rough texture, as smooth surfaces can pull away from the wall.
Before you begin plastering, you should sand the area to remove heavy particles and dust, and clean and dry it thoroughly. If you’re hanging lining paper in a wet room, use plasterboard that resists moisture, which will give you the best results.
Next, prepare the plaster substrate for the lining paper. If the wall is smooth, use a trowel to apply a thin coat of plaster. Make sure the trowel is strong enough to pick up the plaster from all directions, and do this in sections of about 0.5 square meters.
Once the plaster has fully dried, move on to another section and repeat the process until the entire wall is covered. It should dry completely before the lining paper is attached to it.
The first step is to remove any existing wood lath and prepare the wall for the lining paper. This preparation will help prevent the paper from sticking to the wall.
The next step is to apply a heavy-duty adhesive to the paper. It is very important to secure the lining paper in place so that it doesn’t tear off. You can purchase quality lining paper from Wallpapers To Go at a low price.
Using paste-the-wall lining paper versus conventional lining paper
You can choose between conventional and paste-the-wall lining paper to cover peeling paint. Conventional lining paper is made of pure paper that expands when wet and contracts when dry.
When applying conventional lining paper, you should soak the paper for the correct amount of time before hanging it to the wall. Failure to soak it for the recommended time may lead to bubbles and lifted paper at the seams. This can give the finish a bad look and feel.
Professional decorators do not use lining papers and are well versed in the removal of peeling paint. The first step is to clean the walls thoroughly. Then, they scrub, scrape, and wash off any paste that may be left on the walls.
Then, they apply the paint directly on the bare plaster. This method eliminates the use of primer and reduces the risk of the top paper peeling off.
Another advantage of lining paper is that it is more durable. Unlike conventional lining paper, paste-the-wall lining paper does not expand, shrink, or lift when applied to the wall.
Furthermore, it is easier to apply than conventional lining paper. If you are not experienced in decorating, using paste-the-wall lining paper will be a faster and easier way to cover peeling paint.
There are several important things to remember when hanging lining paper to cover peeling paint. First, you need to check if the pattern repeats. Then, cut the lengths according to the width of the wall and leave at least 50mm at the top and bottom for trimming.
Second, if the paper is vertically hung, make sure that you align the first length with a plumb line. Then, hang the paper vertically, overlapping the edges to form the pattern.
Using paste-the-wall lining paper to hide damage on ceilings
Whether your ceiling is cracked or crumbling, the use of lining paper can help you disguise the problem and make repairs easier.
Using lining paper is also a more cost-effective solution than plastering, and it’s ideal for do-it-yourselfers. However, it’s important to note that you should only use this solution for superficial damage – structural damage will only get worse with time.
To measure for lining paper, measure the length of the room and subtract the length of any large obstacles. You should have at least 500mm of lining paper per m2, so the minimum width is 540mm.
Next, mark a horizontal guideline that is 50mm higher than the lining paper’s width. Mark this line with a pencil, then make a second line at 480mm from the adjacent wall.
When pasting the paper, make sure to moisten it thoroughly with water. This step will activate the glue and ensure that the paper sticks to the wall.
If you forget to moisten the paper, the glue will not stick properly. It may also wash off the paste. Therefore, lining paper should be applied only by a professional. However, if you’re unsure of your ability to apply paste, you can use a lining paper kit.
Once the lining paper is ready, you can hang it up. Simply follow the instructions provided by the manufacturer. Leave it to soak for at least five minutes.
Next, use a sponge to smooth the paper from the center to the edges, making sure to brush the edges thoroughly with the sponge to get rid of air bubbles. When finished, trim the paper carefully with a razor. Make sure to use a putty knife to guide it – otherwise, you may tear it.
Frequently Asked Questions (FAQs)
1. What is the best type of lining paper to use for covering up peeling paint?
The best type of lining paper to use for covering up peeling paint is a heavy-duty lining paper. This type of paper is thick and will help to cover up any paint that is peeling. It is also important to make sure that the area is clean and free of any debris before you apply the lining paper.
2. How do you prepare the wall surface before applying the lining paper?
Before you start to apply lining paper to a wall, you need to make sure that the surface is clean, dry and smooth. You might need to sand down rough areas or fill in any cracks or holes. Once the surface is ready, you can start to apply the lining paper.
3. How do you apply the lining paper so that it will stay in place and not peel off?
When applying lining paper, it is important to use an adhesive that will not cause the paper to peel off. Some adhesives that can be used include wallpaper paste or double-sided tape. It is also important to make sure that the surface is clean and free of any debris before applying the lining paper.
4. What are some tips for making sure that the lining paper covers the peeling paint completely?
Some tips for making sure that the lining paper covers the peeling paint completely include:
-Using a thicker lining paper
-Using a lining paper with a higher quality adhesive
-Making sure that the surface is prepared properly before applying the lining paper (e.g., sanding down the surface to create a smooth surface)
-Applying the lining paper in a methodical way (e.g., starting from the top and working down, or vice versa)
-Using more than one layer of lining paper if necessary
5. Is there anything else that you need to do after applying the lining paper to make sure that the wall looks its best?
After applying the lining paper, you should smooth it out with a brush or roller to make sure there are no air bubbles. You may also need to trim the edges of the paper if they are not flush with the wall.
Final Words
Whether a lining paper cover peeling paint depends on the thickness of the lining paper and the severity of the peeling paint. Generally speaking, though, thicker lining paper is more likely to cover peeling paint than thinner paper.
