Tips & Tricks

Why is My Table Saw Tripping the Breaker

Why is My Table Saw Tripping the Breaker?

The reason your table saw is tripping the breaker might be due to overheating. The saw may be plugged into a circuit that only has 20 Amps or a NEMA 6-20 receptacle. If you’re still experiencing this issue, check your plug top fuse. This protects the saw against overload and short circuit faults. If the … Read More

Why is My Table Saw Sparking

Why is My Table Saw Sparking?

If your table saw is sparking excessively, there are a few possible causes. Sparks commonly occur at the commutator or miter saw holder. Read on to find out which of these could be the cause of your sparking problem. If you don’t see a solution in this article, you can always consult your owner’s manual. … Read More

Why Does My Scroll Saw Not Cut Straight

Why Does My Scroll Saw Not Cut Straight?

Cutting a straight line with a scroll saw is nearly impossible. Several common causes can be addressed. This article will discuss adjusting the tension on the blade, changing the blade, and avoiding the pitfalls of improper tension. Following this advice, you’ll be on your way to making straight cuts with your scroll saw. Here are … Read More

Is Circular Saw Blade Steel Good For Knife Making

Is Circular Saw Blade Steel Good For Knife Making?

When choosing a material for your circular saw blade, you should look for hardened steel. The process for hardening steel blades involves positioning the blades close to intense heat. Typically, this temperature is around 900 to 1,100 degrees Celsius. The blades are then cut and shaped, then reheated to 500 degrees Celsius. After the blade … Read More

Can You Use Table Saw Without Guard

Can You Use Table Saw Without Guard?

A question many people ask when they get a new table saw is, can you use it without a blade guard? The answer to this question depends on the safety of the individual. It’s important to use the blade guard, push stick, and safety gloves when you’re working around a table saw. This article will … Read More

Why is My Jigsaw Smoking

Why is My Jigsaw Smoking?

If your jigsaw is smoking, there are a few possible reasons. One reason is glue. This glue can ignite when the jigsaw cuts through it. If you notice scorch marks after a cut, this means that the glue was burned during the cut. This is easily remedied with sanding. Another reason could be that you’re … Read More

Is MDF Good For Table Saw Sleds

Is MDF Good For Table Saw Sleds?

When buying a table saw, you might be wondering, is MDF good for table saw sleds? The good news is that it is affordable, flat, and a relatively reliable material. However, there are some disadvantages to MDF sleds, including the fact that they make a mess while sawing. This article will look at a few … Read More